Ups & Accesories

The PowerWalker VI R1U is a Line-Interactive rack UPS solution. Thanks to its 1U design, the UPS fits in nearly every setting, and fits perfectly for applications where space is a main concern (they also have very low-depth, only 216 mm for the smaller models). It is equipped with pure sine wave output, and it includes an intelligent card slot for network cards, so that even sensitive and critical loads can be kept safe. Considering that the fac is completely switched off in normal operation and the LCD dims out automatically, neither noise nor LCD lighting will disturb you. The PowerWalker VI R1U is a flexible all-rounder for home and semi-professional environments

The PowerWalker VI RLP is a compact 2U Line-Interactive series with rack design. This UPS is the perfect outlet manager and will let you control the outlets individually. Remote switching, reboot each outlet, organize a schedule for the outlets, the possibilities are endless! With an output power factor of 0.9 and pure sine wave output, even the small models can cover most needs and loads. Batteries are easily replaceable by every user. In addition, the UPS can be mounted under a counter or table, thanks to the included installation mounts.

PowerWalker VI 1000RT LCD is a Line-Interactive UPS with pure sine wave output and designed for fulfilling high quality power protection demand. It offers full protection for devices such as servers, network/telephone communication systems as well as for industrial applications. With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19” rack systems or used as tower.

The PowerWalker Basic VI 650/850/1000 SB series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S

The PowerWalker VI 600-2000 SC series offers a simple yet effective solution for PCs and other home applications. It is available with Type F (CEE 7/3), Type E (CEE 7/5) and Type G (BS 1363) outlets and features a microprocessor-controlled Automatic Voltage Regulator, which stabilizes voltage within a safe limit by switching to boost and buck modes.All UPSs in this series can be turned on directly from battery (cold start function) and internal batteries can be charged in standby mode. This model comes with a USB port for communication and can be monitored and controlled using the PowerWalker ViewPower software (available for download from our website). To offer the best price-performance and to reduce environmental impact we provide the UPS without Software CD and USB

The PowerWalker VI SCL (Line-Interactive) series offers a simple yet effective solution for PCs and other home applications. It is available with different outlets and features a microprocessor-controlled automatic voltage regulator, which stabilizes voltage within a safe limit by switching to boost and buck modes. The series offers a convenient touch panel which allows to scroll through most useful monitored parameters. All UPSs in this series can be turned on directly from battery (cold-start function) and internal batteries can be charged in standby mode. This model comes with a USB port with HID support and can be monitored and controlled using the PowerWalker ViewPower software (available for download from our website) or directly using O/S native drivers thanks to HID

The PowerWalker Basic VI 600/800/1000/1200/1500/2200 STL series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S. Additionally this series offers an advanced auto-dimming LCD panel with a smart multi-functional button (a single click will illuminate the LCD panel, a double click will mute the alarm and a long-press will control the output).

The PowerWalker VI CW is an advanced Line-Interactive UPS series with pure sine wave output. Combined with the AVR function for voltage stabilization, this UPS series will provide clean and stable power to the connected equipment. While designed for home and office use, this UPS will also safeguard more sensitive IT and network devices, as well as high-end PC systems. The programmable segment and comprehensive LCD present a high degree of functionality and flexibility that are rarely found in other line-interactive solutions. Additionally this series offers a variety of communication options, such as USB communication with software or without software (HID), or even communication via an optional network card (SMNP).

The PowerWalker VI CSW is a Line-Interactive UPS series with state-of-the-art technology and design. The integrated AVR function and pure sinewave output ensures clean and stable output during power outages or voltage fluctuations. The modern and elegant design makes the VI CSW series especially suitable for home and office use. Applications include (but are not limited to) gaming and entertainment systems, office workstations, NAS etc. Two USB charging ports (2.1A) in the front offer additional functionality and convenience. Furthermore, the design allows easy access to the battery compartment via the front panel for easy battery replacement.

The PowerWalker VI RLE is a compact 2U Line-Interactive series with rack design. The unit provides Pure Sine Wave output with voltage regulation, offering optimal protection for small motor-based loads and servers with APFC power supplies. The USB port features HID support, which allows native communication with nearly all common operating systems – removing the need for installing additional software. Improved internal heat dissipation makes sure the UPS runs silently during standard operation. A comprehensive LCD provides all the necessary information and will auto-dimm after a few seconds. These features make the UPS series an attractive solution for home use as well.

PowerWalker VI 1200 IEC/UK is a Line- Interactive UPS which provides high performance and reliable and cost-effective backup power protection. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or SMB (small medium business) application.

USB with Human Interface Device (HID) support and WinPower software for controlling and monitoring Surge protection on phone line and modem Several versions - Type F (CEE 7/3), Type E (CEE 7/5), IEC also with UK input cable Fast charging 2-4h to 90% Immediate successor of VI SE Series

The PowerWalker VI CSW is a Line-Interactive UPS series with state-of-the-art technology and design. The integrated AVR function and pure sinewave output ensures clean and stable output during power outages or voltage fluctuations. The modern and elegant design makes the VI CSW series especially suitable for home and office use. Applications include (but are not limited to) gaming and entertainment systems, office workstations, NAS etc. Two USB charging ports (2.1A) in the front offer additional functionality and convenience. Furthermore, the design allows easy access to the battery compartment via the front panel for easy battery replacement.

The PowerWalker VI CW is an advanced Line-Interactive UPS series with pure sine wave output. Combined with the AVR function for voltage stabilization, this UPS series will provide clean and stable power to the connected equipment. While designed for home and office use, this UPS will also safeguard more sensitive IT and network devices, as well as high-end PC systems. The programmable segment and comprehensive LCD present a high degree of functionality and flexibility that are rarely found in other line-interactive solutions. Additionally this series offers a variety of communication options, such as USB communication with software or without software (HID), or even communication via an optional network card (SMNP).

PowerWalker VI GXB is a premium line interactive UPS series with state of the art technology and design. The integrated AVR function and Pure Sinewave Output ensures clean and stable output during power outages or voltage fluctuations. The UPS functions can be monitored and controlled via USB communication, either with a software or without (HID). As a Gamer your primary concern will be the protection and continuity of your Gaming PC, your router and your monitor. By doing so you will be able to bridge short outages and keep playing, or perform a safe shutdown during a longer interruption Furthermore, the UPS status can be color customizable so that you can visually recognize in which mode the UPS is.

A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn. AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment. Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status. Line- Interactive UPS are designed for medium cost application with moderate load levels