Cabinets & Accessories

This RJ45 adapter by Delock can be used to extend twisted pair cables.

This RJ45 adapter by Delock can be used to extend twisted pair cables.

This dust cover by Delock can protect network, ISDN or SFP connectors from dirt or damage.

Description This wall outlet by Delock can be installed in-wall or on a back box with 60 mm mounting holes. With its standardized dimensions, it is suitable for easy snap-in mounting of 3 Keystone modules. Note Due to the design only keystone modules up to max. 18.2 mm width can be used. Note: Not compatible with Delock 86179.

This wall outlet by Delock can be installed in-wall or on a back box with 60 mm mounting holes. With its standardized dimensions, it is suitable for easy snap-in mounting of 2 Keystone modules

This module by Delock can be used to extend twisted pair cables. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box

This module by Delock can be used to connect twisted pair cable to an RJ45 jack. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box

This module by Delock can be used to extend e.g. a USB cable. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box.

The staggered modular 24-port Patch Panels from DIGITUS® are with the 1.5 mm cold rolled c-steel perfect suitable for 483 mm (19") rack mounting. Due to the staggered array of the keystone modules a better attenuation ratio is reached between surrounding transmission channels. They are available in the colors grey (RAL 7035) and black (RAL 9005).

To be fitted on 19" 1U rack Prevents collecting dust in server rack + safety for cables

Termination: 110-type Space saving, high-density 19'' panel design Designed to mount to any standard 19'' rack or cabinet 50µ gold-plated contacts Black electrostatic powder-coated steel Accommodates top, bottom or side cable entry Write-on designation label with clear holder on front side Rear cover with wire management bar to ensure proper patch cables bend radius and strain relief For EIA/TIA T568B/A wiring configuration

Professional aluminium power supply unit Rack mountable - ideal for server cabinets

Support board 1U matching Lanberg's 10" wall mount cabinets.

This particular patch panel is designed to use in main and secondary distribution points of fast telecommunications systems. It is a passive part of structured cabling used for termination and organization of twisted-pair cables within 10" rack cabinets. Patch panels is equipped with 12 unshielded RJ-45 ports category 6. Use of IDC/LSA connectors, provides fast and easy installation.

Ceiling and floor cable entry brush panel matching only Lanberg's 19" wall mount cabinets.

Lanberg 10pcs

urface mount boxes are designed to be used within fast data transmission networks. It is a passive part of structured cabling, used mostly for subscriber's terminals. This particular surface mount box is equipped with two unshielded RJ-45 port category 6.

Outlet type: RJ-45 ICT category: Cat. 5/5e Shielding type: Single shielding Mounting method: Surface-mounted

Shelf 1000mm

Shelving for Cabinets