Cables & Adapters

Simple connection for RGB LED controller

Need a cleaner look ?

Looking for a cleaner look ?

colored molex fan adapter from bitfenix

colored molex fan adapter from bitfenix

4-pin Molex Fan Adapter Cable with 3x 3-pin outputs, white textile sleeves and connectors.

This installation kit by Delock enables you to install your 3.5″ devices like hard drives etc. into a free 5.25″ bay of your PC.

This installation kit by Delock enables you to install your 2.5″ devices like hard drives, SSD etc. into a free 3.5″ bay of your PC.

Use this Delock installation frame in your free 3.5″ bay of your computer to install up to two 2.5″ hard drives.

This adapter by Delock enables the connection of up to six additional fans to a computer. It can be modify the speed of the fans by choosing the appropriate voltage

This metal mobile rack can be mounted into a free 3.5″ bay of your desktop PC. A 2.5″ SATA hard drive or SSD can be directly inserted into the frame. The Hot Swap function allows you to exchange the hard drive also during operation (the system must support Hot Swap)

Package content• Power cable Package• Poly bag

This adapter by Delock enables the connection of a serial device via a USB Type-A port

This USB 2.0 to Midi cable by Delock enables you to connect Midi devices, e.g. home stereo, keyboard etc. to a free USB port of your PC or laptop.

This adapter by Delock enables the connection of an HDMI monitor to the system via a free DisplayPort interface.

This adapter by Delock enables the connection of an DVI monitor to the system via a free DisplayPort interface. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.

This adapter by Delock enables the connection of an HDMI monitor to the system via a free DisplayPort interface. The adapter supports a resolution up to 4K Ultra HD at 60 Hz and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.

This hub by Delock can be installed into an existing cut-out of the desk with a diameter of 60 mm or 80 mm to lead through the cables for the monitor, keyboard and mouse. At the same time, the hub offers four USB Type-A female ports. The data transfer and power supply is guaranteed through one USB 3.0 Type-A male and one USB 2.0 Type-A male. The distance between the free connectors can be maximum 20 cm, because the two cables are connected with each other.

This gender Changer by Delock enables you to change the VGA male port into a female port

This gender Changer by Delock enables you to change the VGA female port into a male port