Products tagged with 'ups'

EMD (environmental monitoring device) for SNMP Card 2 is a connectivity devices for remote monitoring of temperature and humidity. It provides dry contacts to communicate with compatible devices such as security system or alarm system.

EMD (environmental monitoring device) for SNMP Manager is a connectivity devices for remote monitoring of temperature and humidity. It provides dry contacts to communicate with compatible devices such as security system or alarm system.

Energy Meter incl. Modbus card for energy meter With the Energy-Meter + the included Modbus-Card the Solar Inverters SVN series can be easily integrated into the existing household system. Equipped with the Modbus-Card, the Solar Inverter can be connected to the energy meter through a RS485 communication port. You can monitor the power generation and the charging of the batteries.

Model: IEC Cable 10A C13/C14 (180cm) 0,75mm² SKU: 91010013 Additional power cable

Model: IEC Cable 10A C13/C20 (180cm) SKU: 91010041 Additional power cable

An external Maintenance Bypass Switch. It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. Built in “Make Before Break” technology, it is easy in operation with a rotary switch. It features terminal block for connecting input and output. Using a relay contact it sends signal to the UPS to switch it to the internal bypass to avoid short of the input and output of the UPS.

An external Maintenance Bypass Switch. It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. Built in “Make Before Break” technology, it is easy in operation with a rotary switch. It features terminal block for connecting input and output. Using a relay contact it sends signal to the UPS to switch it to the internal bypass to avoid short of the input and output of the UPS.

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is recommended for UPSs rated 5000-10000VA

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is rated up to 3000VA.

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is rated up to 3000VA.

An external Maintenance Bypass Switch. It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. Built in “Make Before Break” technology, it is easy in operation with a rotary switch. It features terminal block for connecting input and output. Using a relay contact it sends signal to the UPS to switch it to the internal bypass to avoid short of the input and output of the UPS.

AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual.

AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual.

The PowerWalker Modbus Card is a communication accessory that provides a pair of RJ-45 interface for remote monitoring and controlling of UPSs. It converts standard RS232 signal to RS232 signal with specified address, which allows controlling many UPSs from one computer. You can setup a desired address with jumpers (range 0-255).

The PowerWalker Modbus Card is a communication accessory that provides a pair of RJ-45 interface for remote monitoring and controlling of UPSs. It converts standard RS232 signal to RS232 signal with specified address, which allows controlling many UPSs from one computer. You can setup a desired address with jumpers (range 0-255). Modbus Card for: VFI T, VFI RT, VFI PRT, VFI TCP, VFI TP 3/1, VFI 6000-10000 TGB/TGS/RTG/RTGS

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit) made exclusively for the VFI 6k-10k ICR IoT series. It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads.