Components

A single tower dual fan designed CPU cooler equipped with two optimized 120 mm high static pressure fan and a newly designed heat sink, guaranteeing its outstanding performance.

Designed with a native PCIe 12+4pin connector, the Toughpower GF3 series is compatible with Intel ‘s ATX 3.0 specification and is built for next-gen PCIe 5.0 graphics cards. The wattage marked on 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of GF3 1000W can deliver up to 600W for PCIe 5.0 graphics cards. Note: Recommended wattage is an estimation of system power demand. Actual power demands may vary based on specific components, usage, and many other factors.

Designed with a native PCIe 12+4pin connector, the Toughpower GF3 series is compatible with Intel ‘s ATX 3.0 specification and is built for next-gen PCIe 5.0 graphics cards. The wattage marked on 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of GF3 1200W can deliver up to 600W for PCIe 5.0 graphics cards. Note: Recommended wattage is an estimation of system power demand. Actual power demands may vary based on specific components, usage, and many other factors.

Designed with a native PCIe 12+4pin connector, the Toughpower GF3 series is compatible with Intel ‘s ATX 3.0 specification and is built for next-gen PCIe 5.0 graphics cards. The wattage marked on 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of GF3 1200W can deliver up to 600W for PCIe 5.0 graphics cards. Note: Recommended wattage is an estimation of system power demand. Actual power demands may vary based on specific components, usage, and many other factors.

Toughpower GF3 ARGB series is fully compatible with Intel’s ATX 3.0 specification. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable. The build-in 16.8M colors RGB fan and addressable RGB lighting synchronization with mainstream motherboards.

Thermaltake, as the pioneer who incorporates RGB lights into PSU, has launched the Thermaltake Toughpower Grand RGB Gold Series, coming with a pre-installed, patented 256 Colors Riing 14 RGB fan with 5 lighting modes to choose from and built-in memory. Featuring capacities ranging from 650W to 850W and 80 PLUS Gold certification, Toughpower Grand RGB Series adopts the highest quality components and fully modular design that always accommodate any mainstream build under any circumstances. Manufacturer's warranty is 10 years.

Built with the highest quality of components to the highest of standards, the TOUGHRAM RGB delivers outstanding gaming performance with stunning RGB lighting maximized for effortless sync with your RGB ecosystem.

Thermaltake TOUGHRAM RGB DDR4 3600 CL18 16GB (2x8Gb) Black RGB Lighting R009D408GX2-3600C18B

The Tower 500 is a vertically designed case with three 4mm tempered glass panels for panoramic viewing, along with two pre-installed 120mm standard fans. This chassis supports up to 12" x 12" E-ATX motherboards giving you comprehensive flexibility for enhanced expansion options. It can also be paired with a separately sold LCD panel kit with a 3.9" LCD Display for maximizing the PC's visual effects.

Customize your system build with the TtMod Sleeve Cable, which is sleeved with the heatshrinkless sleeving method and comes in three-layered design: Outer ultra-density weaving, the middle insulating layer with acid and alkali-resistance, fuel resistance, damp proof, and mildew proof features, and inner certified 16 AWG wire, the TtMod Sleeve Cable combo pack offers users more flexibility for easy installation as well as a clean and professional look. The new individually sleeved cables are heat-shrink free to ensure high-quality cable assembly and support for high currents in order to achieve superior performance and stability. There are eight color combos to choose from

Customize your system build with the TtMod Sleeve Cable, which is sleeved with the heatshrinkless sleeving method and comes in three-layered design: Outer ultra-density weaving, the middle insulating layer with acid and alkali-resistance, fuel resistance, damp proof, and mildew proof features, and inner certified 16 AWG wire, the TtMod Sleeve Cable combo pack offers users more flexibility for easy installation as well as a clean and professional look. The new individually sleeved cables are heat-shrink free to ensure high-quality cable assembly and support for high currents in order to achieve superior performance and stability. There are eight color combos to choose from

UX100 ARGB Lighting CPU Cooler CL-P064-AL12SW-A Thermaltake UX100 ARGB Lighting CPU Cooler features 9-high air flow blade, hydraulic bearing, and 16.8 million colors of 15 ARGB LEDs that is ready to sync 5V RGB enabled motherboards from ASUS, ASRock, GIGABYTE and MSI. Switching the customized lighting effect easily and get the ultimate gaming experience.

UX200 ARGB Lighting CPU Cooler comes with the high air flow blades and U-shape copper heatpipes. Built-in ARGB LEDs delivers a vibrant lighting effect that also supports motherboard sync. Compatible with universal Intel and AMD socket.

The V-Tubler PETG Tube 1000mm OD 5/8” (16 mm) rigid tubing for custom PC water cooling configurations.

V200 TG RGB Edition Mid-Tower case comes with one tempered glass panel on the left, three preinstalled 120mm 12V RGB front fans, one 120mm standard rear fan, and supports motherboards up to ATX.

View 200 TG ARGB Mid Tower Chassis is an ATX case that comes with three preinstalled hydraulic bearing 120mm ARGB Lite front fans, and its RGB lighting is visible through its uniquely designed tempered glass front panel.

View 200 TG ARGB Snow Mid Tower Chassis is an ATX case that comes with three preinstalled hydraulic bearing 120mm ARGB Lite front fans, and its RGB lighting is visible through its uniquely designed tempered glass front panel.

The Thermaltake View 51 TG ARGB is a specially constructed full tower case from the View Series chassis which comes with two preinstalled 200mm 5V ARGB fans at the front, one preinstalled 120mm 5V ARGB fan at the rear, and can support motherboards up to E-ATX (up to 10.5'' wide).

The Thermaltake View 51 TG Snow ARGB is a specially constructed full tower case from the View Series chassis which comes with two preinstalled white 200mm 5V ARGB fans at the front, one preinstalled white 120mm 5V ARGB fan at the rear, and can support motherboards up to E-ATX (up to 10.5'' wide).

Designed to expand the legacy of the View Series lineup, the View 71 Tempered Glass Snow Edition Full Tower Chassis features unrivaled cooling support and expandability surrounded in tempered glass for a one of a kind view. Swing open full window tempered glass panels for easy access with all panels properly spaced for optimal airflow. Preinstalled with two 140mm Riing white fans, Vertical GPU mount and 3-Way radiator support for today’s PC hardware demands, the only limitation is your imagination